Tips From the Moving Business Pros: How to Move a Pinball Machine
With pinball making a big renewal across the nation, Mild Giant wants to ensure that these timeless, lovely machines remain damage-free while being transported. Oh, and we want the individuals moving them to be safe, too.
At very first glance, pinball devices can appear frightening to move because of their fragility, size, and weight. Thankfully, our competent Giants have a couple of techniques up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox
Most of contemporary pinballs (made in the last Twenty Years or so) have a hinge system which allows the headbox to be folded down. Early pinball devices had their headboxes bolted on, utilizing either 2 or four bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State machines.
Later devices have hinges and utilize a locking system to keep the headbox upright. There may also be 2 bolts inside as included security, in case the latch is broken or unintentionally un-latched.
For Electro-Mechanical pinball devices, you have to get rid of the headbox rear access panel to get to the bolts and plugs inside. Normally this panel has a lock on it to keep it in location, however over time the secret might have been lost. Frequently, there is a screw keeping this panel in place.
When within, get rid of the bolts and disconnect the large connectors that have electrical wiring decreasing into the maker. You might want to label these ports to put them back in the best area, however they should be different sizes, making it challenging to plug back improperly.
You can now get rid of the headbox completely, or fold the headbox down onto the playfield glass. Make sure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in location.
Early Solid State Pinballs
For early Solid State Pinballs, you will need to eliminate the back glass. There is a lock located on the headbox in one of three places: the left-hand side at the top, right-hand side at the leading or on top of the headbox in the.
As soon as opened, remove the back glass by lifting it up using the lift channel (at the bottom of the glass), and after that pull it out from the bottom.
Then, open up the back box light panel by raising the lock situated on either the left-hand side or right-hand side. The panel can now swing out towards you, and provide you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to raise up the light panel in order to swing it open.
Now that you are within, you can get rid of the bolts, and any plugs that have wires decreasing into the maker. You might wish to label these plugs to put them back in the right spot. You may not have to eliminate the plugs, as the circuitry needs to be long enough to permit the headbox to be folded down.
At this moment, you can secure the lamp panel and replace the back glass.
Modern Solid State Pinballs
For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system located at the back of the headbox. Using the supplied key, turn the lock 90 ° counter-clockwise.
For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the device. This is a basic setup and needs no tools.
You're done if you can now fold down the head box onto the cabinet. Make certain you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
You need to get inside if you can not fold the head box down. There is a lock located at the top of the back glass in the center. Use the supplied key to unlock, and eliminate the back glass by lifting it up from the bottom, and after that pulling it out from the bottom.
Next, you will require to eliminate the screen panel. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).
Eliminate the 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Ensure you utilize some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
Eliminating the Legs.
Pinball Device legs are held in location by 8 bolts. The contemporary pinballs have captive nuts or threaded plates inside for More about the author the bolts to screw into.
However these threaded plates and captive nuts can be harmed, and making use of additional nuts might have been required. If this is the case, you will have to open the front door of the pinball, slide out the playfield glass, and raise up the playfield.
With the front door (coin door) open, move the lock down bar lock throughout and get rid of the lock down bar. Then move out the playfield glass, and put in a safe location. Next, raise the playfield by putting your hand where the ball drains, and lift the playfield up.
You ought to now have access to any nuts that may have been used. Once any nuts have actually been gotten rid of, change the playfield glass and lock down bar, and lock the front door.
Make certain to mark or keep in mind which legs are for the front and back, as they will be changed differently to suit.
Loading the Pinball.
You are now ready to transport your pinball maker. Prior to you fill it, ensure you eliminate the pinballs so they don't bounce around during transport.
It may be easier to remove the legs simply prior to filling the maker if you are moving the pinball utilizing a van or SUV. Get a pal to help and have one of you supporting the pinball, while the other removes the front legs. Move the maker in, then eliminate the back legs. It is much simpler to fill the maker front.
Ensure you strap the pinball in, as you do not want it moving if you have to stop suddenly!
For Electro-Mechanical pinball makers, you require to eliminate the headbox rear access panel to gain access to the bolts and plugs inside. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs use a fluorescent tube for the back glass lighting).
If you are moving the pinball using a van or SUV, it might be much easier to eliminate the legs just prior to loading the maker. Get a buddy to have and help one of you supporting the pinball, while the other gets rid of the front legs.